• Aquaria

What You Need to Do Before You Ditch Your Water Bill for Good



Most people think that the only way to save money on their monthly expenses is by cutting back on things like food and entertainment. But what if there was another option?


What if you could get rid of one of your bills altogether? Believe it or not, this is a possibility – and we’re going to show you how. In this article, we’ll be discussing how and what you need to do before you ditch your water bill for good.


How to Eliminate Your Water Bill

Cutting your water bill may seem like a daunting task, but it is possible. More and more people are taking their water systems off the grid by drilling a well, installing atmospheric water generators (AWGs), or collecting rainwater. These methods may not be right for everyone, but they are becoming increasingly popular due to the high cost of water.


Here, we'll go over the basic steps you need to take before you even begin researching your options:


1. Check with your local municipality to see if they allow residents to go off the grid. In some areas, it may not be legal to collect rainwater or drill a well. For areas where it may be illegal, too costly, or just not feasible, an AWG may be a good option.


2. Determine how much water you will need to sustain your household. This is important because you don’t want to run out of water and be forced to go back on the grid.


3. Choose the right method for you. Once you know what’s allowed in your area and how much water you need, you can decide which method is right for you.


4. Follow any regulations and permit requirements. When drilling a well or installing an AWG, there may be certain regulations you need to follow. Make sure you are familiar with these before starting any work.


5. Have a backup plan in place. No matter how prepared you are, things can always go wrong. It’s important to have a backup plan in place in case your primary water source fails.


Once you've prepared yourself for all the fine details involved in eliminating your water bill, the next step is to start researching your options.


At-Home Water Collection Options

There are several methods of at-home water collection, but the most common are rainwater harvesting, well drilling, and using an atmospheric water generator (AWG).


Rainwater harvesting is the process of collecting and storing rainwater for later use. This can be done with something as simple as a bucket placed underneath a gutter downspout, or with a more complex system that includes a storage tank and pump.


Well drilling is the process of drilling a hole in the ground to reach an underground water source. This is often done when a home is not connected to a public water supply.


An atmospheric water generator (AWG) is a machine that can extract water from the air. These devices come in a variety of sizes and can be used for everything from watering plants to providing drinking water for a whole household.


Which Method is Right for You?

The best method for you will depend on a number of factors, including your climate, the amount of water you need, and your budget.


If you live in an area with high humidity, an AWG may be the best option as it can extract water from the air regardless of the weather outside.


If you live in a dry climate, rainwater harvesting may be a better option. However, you will need to be sure that you can collect enough water to sustain your household during extended periods of drought.


Drilling a well is often the most expensive option, but it can provide an uninterrupted water supply. This is especially important if you live in an area with frequent power outages as pumps used to draw water from a well will not work without electricity.


No matter which method you choose, be sure to do your research and make sure you are prepared before making the switch to an off-grid water supply.


At-Home Water Treatment Options

If you’re not ready to take the plunge and go completely off the grid, there are still ways to save on your water bill. water treatment devices like whole-house filters, reverse osmosis systems, and ultraviolet (UV) disinfection systems can all help to reduce your water consumption and lower your monthly bill.


1. Whole-house filters remove sediment, chlorine, and other contaminants from your water before it enters your home. This can extend the life of your appliances and plumbing fixtures and save you money on repairs down the road.


2. Reverse osmosis systems filter water at the point of use, so you only get clean, filtered water when you need it.


3. UV disinfection systems use ultraviolet light to kill bacteria and viruses in your water. This is a great option for people who are concerned about the safety of their drinking water.


Which Method is Right for You?

The method you choose will ultimately come down to your needs and budget. All three of these options can help you take your water supply off-grid, but the amount you save will depend on how much water you use and how often you need to replace filters or cartridges.


If you’re looking for a long-term solution that requires little maintenance, a whole-house filter may be the best option for you.


If you want the convenience of filtered water on demand, a reverse osmosis system may be a better fit.


And if you’re concerned about the safety of your drinking water, a UV disinfection system may be the best way to ensure that your water is safe to consume.


No matter which method you choose, be sure to do your research and make sure you are prepared before making the switch to an off-grid water supply.


Water-Saving Tips for Off-Grid Systems

Taking your water supply off-grid means you'll need to be prepared to conserve water. Here are a few water-saving tips to keep in mind:


1. Fix leaks - A leaky faucet can waste up to 3,000 gallons of water per year. Check all your faucets and fixtures for leaks and have them repaired as soon as possible.


2. Upgrade your toilets - Older toilets can use up to 5 gallons of water per flush. Today’s low-flow toilets use just 1.6 gallons per flush.


3. Install low-flow showerheads - A standard showerhead uses 2.5 gallons of water per minute. Low-flow showerheads use less than 2 gallons of water per minute and conserve water in the process.


4. Don’t let the water run - When brushing your teeth or washing dishes, don’t let the water run the entire time. Turn it on when you need it and turn it off when you’re done.


5. Use a water-saving aerator - A water-saving aerator can reduce water usage by up to 50%. These devices attach to your faucet and mix air with the water, resulting in a steady stream of water that uses less water overall.


6. Wash full loads of laundry - Washing smaller loads of laundry wastes water and money. Try to wash full loads whenever possible.


7. Water your plants during the cool hours of the day - Watering your plants during the cooler hours of the day (early morning or evening) helps to reduce evaporation and saves water.


8. Mulch your plants - Mulching your plants helps to reduce evaporation and saves water.


Thinking of Taking Your Home Water Supply Off the Grid?

With Aquaria, you can take your home water supply off the grid without sacrificing quality or convenience. Aquaria is an atmospheric water generator that produces gallons of clean, filtered water every day, straight from the air.


Aquaria’s advanced filtration system removes 99.99% of bacteria and viruses from water, making it safe to drink. And because Aquaria is a point-of-use water system, you’ll always have clean, filtered water on demand.


If you’re interested in taking your home water supply off the grid, contact Aquaria today to learn more about our atmospheric water generators and get a quote!

3 views0 comments

Get a Quote

Thanks for submitting! We’ll send you a price quote soon.