Make ~66 gallons of clean water a day — from air
Ideal for smaller homes, water supplementation, or emergency backup. Own your own water source.
Your Water, Your Way
Manage your Hydropack with ease using the Aquaria app. Schedule Hydropack to take advantage of daytime rooftop solar production. Optimize run time for more humid conditions. Your water is in your control.
Technical SpecificationWhat you'll make where you live
Works best in warm temperatures with relative humidity above 30%. Baseline measured at 80°F and 80% RH — actual production varies by climate.
Browse More Products
“ The water tastes great, and I don't have to go to the store to buy it. ”
Don't just take our word for it — hear from Robert R. from McAllen, TX and more
Independence, in your hands
Water Independence is in the Air
Produce clean water straight from humidity — no wells, no permits, no municipal pipes.
Control is in Your Hands
Flexible, plumbing-integrated, and pairs perfectly with your solar setup.
Clean, Reliable Water
Multi-stage filtration that exceeds EPA standards — no PFAS, no microplastics.
Our Gallery
No payments for 6 months. Get your Hydropack S for as little as $0 down today.
Get Your Free Water Plan
Two quick steps. We'll send the right system size, expected output for your climate, and exact pricing — usually within one business day.
Frequently Asked Questions (FAQs)
The water from Aquaria Hydropack series or Hydropixel is filtered as part of the generation process and exceeds EPA standards straight from the system — no additional filter or treatment required. If you'd like ongoing peace of mind, we recommend a simple annual third-party water test on your installation to confirm performance over time.
Tap water quality depends on your local source and infrastructure, and can carry PFAS, arsenic, nitrates, or microplastics; bottled water adds ongoing cost and plastic waste. Aquaria water is made on-site from air and tested non-detect for those same contaminants, so you get consistent, verified quality without a monthly delivery or an uncertain source. It also comes out at a balanced pH of 6.5–8.5.
All of our water testing is performed by SimpleLab, an award-winning, independent, ISO-accredited laboratory that specializes in drinking water. We publish the full results — six downloadable lab reports covering PFAS, microplastics, and overall water quality for both the Hydropack series and Hydropixel — right on this page. We recommend reviewing them, and once your system is installed we suggest a simple annual third-party test to confirm performance over time.
In an independent lab testing by SimpleLab, Aquaria water came back "Not Detected" for all four contaminants we test for: PFAS ("forever chemicals"), arsenic, nitrates, and microplastics. For comparison, typical Texas utility water in the same tests showed measurable PFAS (around 0.025 PPB), arsenic (around 0.0075 PPM), and nitrates (around 0.73 PPM). Because the water is generated from air rather than drawn from the ground or a municipal line, it doesn't start with the contaminants those sources can carry.
Yes. Every drop passes through multi-stage filtration, and in independent lab testing by Microbac Laboratories, Pace Analytical, and EMSL Analytical, Aquaria's water was non-detect for 100+ contaminants, no microplastics, PFAS, or dissolved heavy metals. We recommend an annual third-party water test on your own installation to confirm performance over time.
